User's Manual

Initial Installation

REPLACING FUSES

If the fuse blows,

determine the cause, then correct the problem. After the

problem is resolved, replace the fuse. If newly installed fuses continue to

blow, disconnect the power cable and contact your dealer for assistance

Only use fuses of the specied type and rating, otherwise the transceiver

could be damaged.

Fuse Location Fuse Current Rating

Transceiver 15A

Supplied Accessory DC

power cable

20A

If you use the transceiver for a long period when the vehicle battery is

not fully charged, or when the engine is OFF, the battery may become

discharged, and will not have sufcient reserves to start the vehicle. Avoid

using the transceiver in these conditions.