User's Manual

31
The current setting will appear on the display.
The default setting is [S-M .OFF].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
ON:
Uses the RSSI value to display the S-meter signal.
▼
OFF:
Uses the noise squelch to display the S-meter signal.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.

SQUELCH HANG TIME
Set the duration of time before switching to MUTE-CLOSE state after
stopping receiving a signal when the S-meter is set to ON.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "36".
The current setting will appear on the display.
The default setting is [S-HT.OFF].
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
OFF (0ms) to 900 (900ms) (10 steps in 100ms increments)
3.
Press the push-button rotary knob.
The unit will go back to menu mode.
7
PARAMETER SETTING MODE