User's Manual

25
PARAMETER SETTING MODE
7
DEFAULT TONE VALUE
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5
94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3
131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 179.9
186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3
• 250.3Hz is followed by 67.0Hz.
• 67.0Hz comes before 250.3Hz.
3.
Press the push-button rotary knob.
The unit will go back to menu mode.

DEFAULT DCS VALUE
Set the DCS value which is displayed by operating the [TS/DCS/LOCK]
key for the rst time after turning on the power. Select one out of 104
types of standard codes.
1.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "19".
The current setting will appear on the display.
The default setting is [T.67.0 ] (67.0Hz).
2.
Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
▼
023 to 754 (See the table below).
DEFAULT DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754