User's Manual

41
Useful functions
6KRUW&XWNH\
Various functions can be assigned to  key. There is not a factory default allocation for this key, therefore
only beep will be heard by pressing this key.
1. Enter to set mode and select desired
item.
2. Press and hold  key until beep sound to
be heard. When this function is activated
 appears on the display.
3.  key operates on both VFO and memory
modes.
4. To cancel repeat step 2.
NOTE
to rewrite  key, delete registered data first and then register new item.
5*%FRORUVHWWLQJ
This is to select the display illumination color.
Total 16 colors can be selected. 10 standard colors as CL0 to CL9 and 6 user setting colors as CLA to CLF.
• CL0 to CL9 colors can be changed but color memory channel cannot be deleted.
• CLA to CL9 are made by user otherwise will not appear on the display. To delete the color for registered
channels, select last channel then press and hold left dial knob.
• Refer to set mode for wait, reception and transmission’s color setting.
• RGB color setting can be reset. (P.73)
1. Press  key while pressing and holding
FUNC key. The RGB setting appears on
the display. Rotate the left dial to change
the color and select color memory
channel.
2. Rotate the right dial to change RGB value.
Press right dial to select value for R (Red), G (Green) or
B (Blue).
3. Press left dial to save the value. Press
any key other than dial knob to complete
and exit the process.
To exit without saving press FUNC key
without pressing left dial.
Color memor
y
channel