User's Manual

Set mode

0HQX5HVWRUHVHWWLQJ

This is to restore set mode settings. This function is useful to restore settings after resetting

the radio. After Adjusting parameters in set mode use this function to restore the settings.

IMPORTANT

Color setting and some other setting out of set mode cannot be restored.

1. Press and hold FUNC key to enter the

parameter set mode. Press dial to select

menu 21. Factory default setting is [OFF].

2. Rotate the right dial to select SAVE and

then press and hold FUNC key until

hearing the beep.

3. Pressing any key other than the dial knob

or the UP/DOWN keys will complete the

setting and the unit will exit the parameter

setting mode.

4. To recall restored data, repeat above

sequence and select YES, then press and

hold FUNC key until hearing the beep.

5. Reset function will not delete restored

setting data. To delete repeat 1 and select

DELET and then press and hold FUNC

key until hearing the beep.

IMPORTANT

Settings in set mode can be restored even after doing all reset; however memory

channels cannot be restored after all reset.