User's Manual

28
Set mode
0HQX,OOXPLQDWLRQFRORUVHOHFWLRQGXULQJWKHZDLWLQJ
WLPH
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 10.
2. By rotating the dial, the display changes
as shown and the illumination color
selection during the waiting time is
changed.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
CL0 : White CL5 : Purple
CL1 : Red CL6 : Light Blue
CL2 : Green CL7 : Orange
CL3 : Blue CL8 : Pink
CL4 : Yellow CL9 : Light Green
0HQX,OOXPLQDWLRQFRORUVHOHFWLRQGXULQJUHFHLYLQJ
VLJQDO
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 11.
2. By rotating the dial, the display changes
as shown and the illumination color
selection during receiving signal is
changed.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
CL0 : White CL5 : Purple
CL1 : Red CL6 : Light Blue
CL2 : Green CL7 : Orange
CL3 : Blue CL8 : Pink
CL4 : Yellow CL9 : Light Green
SBCL0 SBCL9
RXCL0 RXCL9