User's Manual

27
Set mode
0HQX&RORUPRGHVHOHFWLRQ
This is the mode to select color mode for various conditions.
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 09.
2. By rotating the right dial, the display
changes as shown and the color mode
function selection is changed.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
ALL : The color on the left and right sides of the display can be adjusted regardless of
the main band, sub band, VFO or memory channels. This is to set color on the
left and right side for each waiting, transmitting and receiving conditions.
(Green, Yellow and Purple on the left side and Blue, Red and White on the right
side regardless of the band)
MEMORY : Select one color for VHF and another color for UHF regardless of the left or right
side of display.6 colors are assigned for 3 bands, left and right sides. Also each
memory channel can be programmed for these colors.
GRADTN : Gradation mode. Color on the display changes automatically.
RAINBW : Rainbow colors will move from left to right.
NOTE
GRADTN and RAINBW mods are fixed and not available for setting or
memory channel.
GRADTN MEMORYALL RAINBW