User's Manual

26
Set mode
0HQX9)2%HHSVHOHFWLRQ
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 07. Factory default setting is [OFF].
2. Rotate the right dial to select a desired
item. This setting is individual regardless
of the band or VFO.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
0HQX,QFRPLQJFDOOVHOHFWLRQ%HOO
Incoming call function informs you that you are being called by sounding a bell, and flashing
the bell icon on the display.
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 08. Factory default setting is [OFF].
This parameter can be selected for both
left and right sides in VFO mode and
cannot be selected for each band.
2. By rotating the dial, the display changes
as shown and the bell function setting is
changed.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
When bell is on:
• Bell icon appears on the display.
• When squelch becomes open, bell icon will flash and beep sound will be hear.
• No beep sound during communications.