User's Manual
21
6HWPRGH
IMPORTANT
Please read the following pages thoroughly prior to changing any parameters. The
parameters in set mode cannot be set without entering the set mode.
By entering the set mode, some of the radio’s operating parameters can be changed to suit
your application. The following is the selectable parameters menu.
$OLVWRIVHWWLQJPRGHSDUDPHWHUV
Copy or cut the following list of the setting mode parameters for your convenience.
Menu Default Display Function Default Value
01 AUTO AUTO Channel Steps setting AUTO AUTO
02 AUTO AUTO Operating mode selection AUTO AUTO
03 MCGAIN 0dB Microphone gain Adjusting 0dB
04 BUSY BUSY Scan type selection BUSY BUSY
05 SKIP SKIP Memory cancel mode selection SKIP SKIP
06 BEEP 2 Beep level selection 2
07 VFO - BP ON Incoming call display… ON
08 BEL - OF BEL - OF Incoming call display OFF OFF
09 CLMODE ALL Color mode function selection ALL
10 SB CL0 SB CL0
Illumination color switching during the
waiting time
CL0 CL0
11 RX CL0 RX CL0
Illumination color switching when receiving
signal
CL0 CL0
12 TX CL0 TX CL0
Illumination color switching when
transmitting
CL0 CL0
13 DIMMER 10 Dimmer 10
14 LAMP OFF Back light timer OFF
15 CN TRST 3 Contrast setting 3
16 ATT - OF ATT - OF Attenuator selecting OFF OFF
17 MPRTCT OFF Memory protection OFF
18 SUBPTT OFF Sub PTT allocation function OFF
19 KEY 2 Key push and hold time selecting 2
20 AUTRPT ON Auto repeater ON
21 RESTOR OFF Restore function OFF