User Manual

25
Set mode
2. Rotate the dial to select a desired item.
SKIP : Skips unwanted channels that inconveniently
stop scanning.
ALL : Repeatedly scans all frequenciesover the entire
band regardless of the SKIP or FAV channels.
FAV : Scans only favorite channels.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
0HQX%HHSOHYHOVHOHFWLRQ
This is to change the volume of a beep sound during operation.
1. Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 06. Factory default setting is [2].
2. By rotating the right dial, the display
changes as shown and the volume of the
beep sound will be changed. This setting
is individual regardless of the band or
VFO.
3. Pressing any key other than the dial knob
or the UP/DOWN keys will complete the
setting and the unit will exit the parameter
setting mode.
Volume 0 Volume low Volume high