User's Manual
Table Of Contents
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
57
Maintenance / Reference
DCS
SUB
TNC
R
AM
SQL
BUSY BUSY1 3 5 7 9
MiLo
Nar
Reset
Resetting the unit returns all programmed contents to their factory default settings.
Factory Default Settings
IMPORTANT: While holding the FUNC key down, turn the power on. All segments of the LCD will be
displayed, then default settings are displayed.
All LCD segments
1. Press the PWR key for more than 1 second with
the FUNC key pressed and turn the power on.
2. All segments of the LCD will be displayed, then
default settings are displayed.
DR-635T DR-635E
MAIN band VHF VHF
VFO frequency (VHF) 145.00MHz 145.00MHz
(UHF) 445.00MHz 435.00MHz
CALL frequency (VHF) 145.00MHz 145.00MHz
(UHF) 445.00MHz 435.00MHz
Memory channel - -
Offset direction - -
Offset frequency (V/U) 600kHz/5MHz 600kHz/7.6MHz
Channel step 5kHz 12.5kHz
Channel step (FM) 100kHz 100kHz
Tone-squelch setting - -
Tone frequency 88.5Hz 88.5Hz
DCS setting - -
DCS code 023 023
Output power HI HI
Scan resuming condition
busy busy
Beep volume setting 2 2
Time-Out-Timer OFF OFF
TOT penalty OFF OFF
APO OFF OFF
Tone burst sound setting ALERT 1750Hz
Clock shift setting OFF OFF
Bell setting OFF OFF
Busy-Channel-Lock-Out setting
OFF OFF
Theft Alarm setting OFF OFF
Display color setting 3 3
Dimmer setting 4 4
Squelch level 02 02