User's Manual
Table Of Contents
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
27
Parameter Setting Mode
To use the parameter setting mode
1. Press the FUNC key for more than 2 seconds to
enter the parameter Setting mode.
2. Select a menu by pressing the FUNC key and
the SQL key, or UP/DOWN keys on the micro-
phone.
3. Rotate the main dial to change the setting.
4. Pressing the FUNC/SQL and UP/DOWN key
will complete the setting and enter the next
menu.
5. Pressing any key other than the FUNC/SQL or
the UP/DOWN key will complete the setting
and the unit will exit the parameter setting mode.
Default display