User's Manual
Table Of Contents
- DR-635 User Manual.pdf
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
50
Special Functions
Packet Communication
Packet communication is a high-speed data communication system transmitting a package of data
generated through a personal computer. The use of Digi-peaters (relay stations) offers communica-
tions with DX stations (distant stations). For packet communication, a personal computer, DSB-9
cable and the optional EJ-50U (TNC unit) are required in addition to this unit.
The EJ-50U is equipped with a Digi-peater function. For detailed information, please refer to the
instruction manual of the EJ-50U.
When using EJ-50U
Connect the EJ-50U with a personal computer.
1. Connect the EJ-50U and DSUB9 connecter to this unit following the figure below.
A sheet attached to the place meant for the DSUB9 connecter can be removed easily
by pressing from the inside.
2. Insert DSUB connecter W1 into the EJ-50U.
3. Insert W2 of EJ-50U into CN4 of this unit.
CN3
Cushion
EJ-50U
W1
D-SUB9 connecter
Hexagon screw
Clip washer
W2
CN4
EJ50U should not mount on the chassis.