User's Manual
Table Of Contents
- DR-635 User Manual.pdf
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
12
Part Names and Functions
Rear Panel
4 3 5 2
1
No.
Key Function
1
External Speaker Terminal
Terminal for optional external speaker.
(Also used for the clone function.)
2Power cable Connects to the 13.8VDC power supply.
3Air-cooling fan Turn on while PTT is being pressed or when
the unit is hot.
4 Antenna Connector Connect an antenna with 50 ohm impedance.
(PL-259 or compatible)
5
D-SUB Connector (Optional)
Connects to a personal computer for packet use.
•
Functions that can be activated while pressing the FUNC Key
No.
Key Function
1 PWR Reset to factory default settings.
5V/M/MW Erase the memory.
8 BAND/VVUU Switches to the single band mode.
9
CALL/RXBAND
Accesses the clone function mode.
10 MHZ/SHIFT Switches to wide/narrow mode reception.
11
TSDCS/LOCK
Switches to the AM reception mode.
12 HL/PACKET Sets the channel name function.
13 SQL/D Accesses the power supply voltage indication mode.
• Functions that require continuous pressing to be activated.
No.
Key Function
13 SQL/DIGITAL When pressed for 1 second, the monitor function is on.
(When the shift is set, the reverse function is on.)
14 FUNC/SET When pressed for 2 seconds, accesses the set mode.