User's Manual Part 2

37
Useful functions
•Memory Scan
Scans all memory channels unless Memory skip feature is
selected for a given memory.
1. Enter Memory mode.
2. Sequence is the same as in VFO scan. Use UP/
DOWN keys for commands.
Range of Memory Scan
Exclusive scanning for VHF/UHF:
If scanning is started somewhere between 00 and 79,
scanning is always repeated within this range.
Mixed scanning for V/U:
If scanning is started somewhere between 100 and 139,
scanning is always repeated within this range.
During mixed scanning for V/U
•Skip-channel setting
A memory channel set as a skip-channel will be excluded
from scanning during Memory Scan, and can be set even af-
ter the memory is programed.
1. Press the FUNC key in the Memory mode, and
then press the V/M key while [F] icon is illu-
minating. Skip setting of a memory channel
selected is made.
A memory channel with skip setting will have
1MHz decimal point put off.
2. To cancel skip-channel setting, repeat the step 1.
IMPORTANT: CALL, PL, PH, AL, AH and ch.99 are always skipped.