User's Manual Part 2

Parameter Setting Mode

Transmission speed setting

(In packet operation)

This is to set transmission speed at the time of data communication.

1. [HB 1200] icon appears on the display.

2. By rotating the main dial, the display changes

as right and setting is changed.

[HB 1200] Transmission speed is set at 1200bps.

[HB 9600] Transmission speed is set at 9600bps.

Beacon interval setting

(In geolocating communication/A.P.R.S.

)

This is to set a transmission time separation of GPS location data when Geolocating communica-

tion is in operation.

HB 1200 HB 9600

1. [BCON 0] icon appears on the display. No

transmission is made at BCON 0.

2. By rotating the main dial, the display changes

as below and setting is changed.

Setting for call sign, transmission speed and beacon interval will be transmitted to TNC unit (EJ-

50U) by TNC clone.

Operation of TNC will stay unchanged until TNC clone transmission will be completed.

BCON 05

(30sec.)

BCON 30

(30min.)

BCON 0

(OFF)

BCON 20

(20min.)

BCON 10

(10min.)

BCON 1

(1min.)

BCON 3

(3min.)

BCON 5

(5min.)

(Refer page 27 for how to enter the setting mode.)