User's Manual Part 2

56
Maintenance / Reference
DCS
SUB
TNC
R
AM
SQL
BUSY BUSY1 3 5 7 9
MiLo Nar
Reset
Resetting the unit returns all programmed contents to their factory default setting.
Factory Default Settings
NOTE: While holding the FUNC key down, turn the power on. All segments of the LCD will be displayed,
then default settings are displayed.
IMPORTANT: While holding the FUNC key down, turn the power on. All segments of the LCD will be
displayed, then default settings are displayed.
All LCD segments
1. Press the PWR key for more than 1 second with
the FUNC key pressed to turn the power on.
2. All segments of the LCD will be displayed, then
default settings are displayed.
DR-620T DR-620E DR-620TA
MAIN band VHF VHF VHF
VFO frequency (VHF) 145.00MHz 145.00MHz 165.00MHz
(UHF) 445.00MHz 435.00MHz 460.00MHz
CALL frequency (VHF) 145.00MHz 145.00MHz 145.00MHz
(UHF) 445.00MHz 435.00MHz 460.00MHz
Memory channel - - -
Offset direction - - -
Offset frequency (V/U) 600kHz/5MHz 600kHz/7.6MHz 600kHz/5MHz
Channel step 5kHz 12.5kHz 5kHz
Channel step (FM) 100kHz 100kHz 100kHz
Tone-squelch setting - - -
Tone frequency 88.5Hz 88.5Hz 88.5Hz
DCS setting - - -
DCS code 023 023 023
Output power HI HI HI
Scan resuming condition timer timer timer
Beep volume setting 2 2 2
Time-Out-Timer OFF OFF OFF
TOT penalty OFF OFF OFF
APO OFF OFF OFF
Tone burst sound setting ALERT 1750Hz ALERT
Clock shift setting OFF OFF OFF
Bell setting OFF OFF OFF
Busy-Channel-Lock-Out setting OFF OFF OFF
Theft Alarm setting OFF OFF OFF
Display color setting 1 (Amber) 1 (Amber) 1 (Amber)
Dimmer setting 4 4 4
Squelch level 02 02 02