User's Manual Part 2

55
Special Functions
Entering a frequency directly
Frequencies can be entered directly by pressing the numerical keys of the microphone.
• Range of frequencies to be input
87.500 - 107.995MHz (WFM reception)
144.000 - 145.995MHz
430.000 - 439.995MHz
1. Set the microphone DTMF/REMOTE switch to the REMOTE position.
2. DTMF keys can be used to enter from the 100MHz digit.
(Ex.) When setting 144.20 MHz with the tuning step set to 20kHz.
Enter 1 4 4 2 0
After entering the fifth digit a slightly longer beep is emitted and the entry is com-
pleted.
3. Canceling an entry before it is completed. Press PTT key or C key.
Entry method depending on tuning step
Depending on the set tuning step, digit entry may be necessary to the 1 kHz digit. In some cases
entry to the 10 kHz digit is sufficient. For cases in which digit entry is only necessary to the 10 kHz
digit some digit keys were not accepted.
The relationship between the tuning step and input method is as follows.
Tuning step
Entry
Final digit selection
completion digit
5.0 kHz
1 kHz Completion after input of the 1 kHz digit.
8.33 kHz
10.0 kHz 10 kHz Completion after input of the 10 kHz digit.
When you input the 10 kHz digit, the 1 kHz digit set as follows.
12.5 kHz 10 kHz 0···00.0, 1···12.5, 2···25.0, 3···37.5, 4···invalid
5···50.0, 6···62.5, 7···75.0, 8···87.5, 9···invalid
15.0 kHz 10 kHz Completion after input of the 10 kHz digit.
20.0 kHz 10 kHz Completion after input of the 10 kHz digit.
When you input the 10 kHz digit, the 1 kHz digit set as follows.
25 kHz 10 kHz 0···00.0, 2···25.0, 5···50.0, 7···75.0,
Other entries are invalid.
30 kHz 10 kHz When you input the 10 kHz digit, the 1 kHz digit set as follows.
50 kHz 10 kHz
When you input the 10 kHz digit, the 1 kHz digit set as follows.
0···00.0, 5···50.0