User's Manual Part 2

Special Functions

Setting alarm starting time

Choose this operation when a delay period is desired.

1. Enter the Parameter setting mode as described

previously and select SCR-DLY. Follow the

previous instruction to set.

2. Turn off the unit. Display will disappear but

the LCD illumination stays on. After 20 sec-

onds TX LED lights up, illumination dims, and

alarm functions. The system won’t work dur-

ing the 20 second “DELAY” period.

3. The alarm sounds under the same condition as

described previously. There is a 20 second de-

lay until the alarm sounds. During the 20 sec-

ond period, only the display illumination is lit.

Turn ON the unit with the SQL key pressed

during “DELAY” period to cancel the alarm

function.

IMPORTANT: Please set the parameters at SCR-OFF during normal operation.

NOTE: Please use a sticker provided indicating installation of the theft alarm device.

TX display lamp

BAND

CALL MHz

VV/UU

V/M

MAIN

VOL

MAIN

TX/RX

RX BAND SHIFT LOCK

PACKET DIGITAL

TS/DCS

H/L SQL FU

VHF/UHF TWIN BAND FM TRANSCEVER

DR-620