User's Manual Part 1

12
Part Names and Functions
Rear Panel
4 3 5 2
1
No. Key Function
1 External Speaker Terminal Terminal for optional external speaker.
(Also used for the clone function.)
2 Power cable Connects to the 13.8VDC power supply.
3 Air-cooling fan Cools the unit during transmission. (PTT activation)
4 Antenna Connector Connect an optional antenna for 50 ohm
impedance. (PL-259 or compatible)
5 D-SUB Connector (Optional) Connects to a personal computer for packet use.
• Functions that can be activated while pressing the FUNC Key
No. Key Function
1 PWR Reset to factory default settings.
5 V/M/MW Erase the memory.
8 BAND/VVUU Switches to the single band mode.
9 CALL/RXBAND Accesses the clone function mode.
10 MHZ/SHIFT Switches to wide/narrow mode reception.
11 TSDCS/LOCK Switches to the AM reception mode.
12 HL/PACKET Sets the channel name function.
13 SQL/D Accesses the power supply voltage indication mode.
• Functions that require continuous pressing to be activated.
No. Key Function
13 SQL/DIGITAL When pressed for 1 second, the monitor function is on.
(When the shift is set, the reverse function is on.)
14 FUNC/SET When pressed for 2 seconds, accesses the set mode.