User's Manual

15
4. Part Name of Functions
Rear Panel
3
21 4
No. KeyFunction
1 Ext. Power jack Terminal for connecting optional EDC-37 for
use with ignition key on/off function. (T/E
models only)
2 External Speaker Port For optional external speaker
3 DSUB-9 Connector Terminal where external TNC may be con-
nected for packet use. With optional EJ-41U,
connects internal TNC to the computer. (T/E
models only)
4Antenna Connector Connection for 50 ohm coaxial cable and
antenna.
• Functions that can be activated while pressing the FUNC Key
No. KeyFunction
1PWR Reset to factory default settings.
5 V/M/MW Erase the memory.
6 MHZ/SHIFT Switches to wide / narrow mode.
7 TSDCS/LOCK Sets the auto dialer.
8 CALL/H/L Accesses the clone function mode.
9 SQL/D Accesses the power supply voltage indication mode. (T/E
models only)
• Functions that require continuous pressing to be activated.
No. KeyFunction
4 FUNC/SET When pressed for 2 seconds, accesses the set mode.
6 MHZ/SHIFT When pressed, within 1 second the scan start.
9 SQL/D When pressed, within 1 second the monitor function is on.