User's Manual

14
4. Part Names and Functions
Front Panel
10
12 4 5
6
7
8
9
3
11
2
1
•Primary Functions
No. KeyFunction
1PWR Power turns ON / OFF whenever the key is pressed.
2Volume knob Adjusts the AF audio level.
3Dial Changes the frequency, memory channel and scan direction.
4 FUNC/SET Sets the function mode to access additional settings.
5 V/M/MW Switches between VFO mode and memory mode.
6 MHZ/SHIFT Changes the frequency in 1 MHz steps.
7 TS/DCS/LOCK Sets the tone squelch and DCS setting.
8 CALL/H/L Switches to CALL mode.
9 SQL/D Sets the squelch level
10 DATA Terminal Used in clone and theft alarm functions.
11 TX Light indicator Lights during transmission.
12 Mic. Connector Connection port for supplied microphone.
•Functions which can be activated while F appears, after
pressing the FUCN Key.
No. KeyFunction
4 FUNC/SET Confirms selection of other functions and exits the function mode.
5 V/M/MW Programs the data in to memory channel.
6 MHZ/SHIFT Sets the shift direction and the offset frequency.
7 TSDCS/LOCK Sets the key lock function.
8 CALL/H/L Switches between HI, MID, and LOW power transmission.
9 SQL/D Accesses the packet communication mode. (T/E models only)
AM reception(DR-235TMk only)