User Manual

10. Maintenance / Reference

Reset

Resetting the transceiver returns all programmed contents to their factory default setting.

If any problems persist, resetting may overcome them and return the transceiver to normal opera-

tion.

Reset Procedure

While holding the FUNC key down, turn the power on.

All segments of the LCD will be displayed, then default set-

tings are displayed.

Factory Default Settings

Note: Take special care when resetting because all settings are initialized.

DR-135TMK

VFO frequency 145.00 MHz

CALL frequency 145.00 MHz

Memory channel 0-99

Offset direction -

Offset frequency 600 kHz

Channel step 5 kHz

Tone setting -

Tone frequency 88.5 Hz

DCS setting -

DCS code 023

Output power HI

Keylock setting OFF

TOT OFF

APO OFF

Squelch level 0

All LCD segments