User Manual

8. PACKET OPERATION

Note 1: To change the set mode menu, press the UP and DOWN keys at the top. To change its

contents, press the * and # keys. Press any key other than the * or # key to return to the

frequency display.

Note 2: To change the auto dialer memory, press the UP and DOWN keys at the top. The numbers

can be entered directly by pressing the numerical keys; the numbers or symbols can also

be selected by pressing the * and # keys and entered by pressing the A key. Press C to clear,

and the B, D, or PTT key to return to the frequency display.

Key

Transceiver corresponding key

Function Page

0-9 – Direct frequency input –

A V/M Memory channel access 17

B CALL Call channel access 19

C SET mode SET mode access (Note 1) 21

FUNC+TS / DCS Auto dialer memory registration (Note 2)

Press and hold SQL Monitor function 19

#– – –

0 H/L Switching transmission output 20

9. Remote Control Operation

The transceiver can be controlled remotely by operating the DTMF keys on the microphone. Fre-

quencies can also be entered directly from the microphone.

1. Enter the remote command or the frequency.

2. Press LOCK to prevent the transceiver from accepting remote control inputs from

the microphone.

3. To operate remote control, press REMOTE.

[List of Remote Control Keys]

LOCK

DTMF

OFF