User's Manual

Maintenance and Reference

8.2 Resetting

The resetting deletes all programmed memory channels and

returns to the initial (default) factory settings.

1. Hold the key for 1 second to turn the power ON

while holding the [F] key.

2. Release the keys when all icons and indicators are

displayed.

The receiver returns to the initial VFO mode.

■Factory default value

• VFO frequency 145MHz

• Max number of memory channels 1000ch

• Volume level 30

• Squelch level 3

• Tuning step Auto

8.3 Optional Accessory List

EBP-58N: Li-Ion rechargeable battery pack (3.7V 600mAh)

EDC-126: AC Adapter (6.0V 0.5A/120V for DJ-X7T)

EDC-128: AC Adapter (6.0V 0.5A/220V for DJ-X7E)

EME-25: Curl-cable earphone/antenna

EDH-32: Cigar-socket DC cable

EME-18: Straight-cable earphone

ESC-38: Softcase

ERW-4C: PC interface-cable

PWR

Caution

Before resetting the receiver, be sure to check out the

setting of the Write-protect function (see on P.34).

Executing the resetting with the function OFF state

deletes all programmed memory channels and returns to

the initial (default factory) settings.

Once you execute the resetting and delete the data

you've programmed, it is not possible to undo it (unless

you saved the data in your computer with the editing

software).