User Manual

Convenient Functions on DJ-X3

The Set Mode Function

This Set mode allows you to customize the DJ-X3 for your particular application.

The following items can be set in Set mode.

ATT (Attenuator) function (P.38)

Setting the antenna (P.38)

Selecting the modulation mode (P.39)

Selecting from stereo and monophonic (P.40)

Setting Bugging Detector sensitivity (P.40)

Setting bank link (P.41)

Lamp function (P.42)

Setting the scan mode (Timer scan/Busy scan) (P.42)

APO (Auto Power Off) function (P.43)

BS (Battery Save) function (P.44)

Overwrite memory setting (P.44)

PRIO (Priority) Watch function (P.45)

Beep function (P.45)

Setting operation in the Monitor and Mute function (P.46)

Setting operation of the MONI key (P.46)

■

Setting Each Item

All the items of the Set mode are set by the same operation.

1 Press the [FUNC/ENTER] key.

"F" will appear on the display.

2 Press the dial (the [VOL/SQL(SET)] key) down.

Change to the Set mode and the item name will be displayed.

3 Select an item by pressing the dial. (the [VOL/SQL(SET)] key)

Each press of the [VOL/SQL (SET)] key changes the item as shown below.

Att ➝ wHIP(EAr) ➝ AbAr ➝ SbAr ➝ wAvE ➝ StErEo(mono) ➝ bUg ➝ bL0

➝ LAmP ➝ tImEr(bUSy) ➝ APo ➝ bS ➝ ow ➝ Pr ➝ bEEP ➝ PUSH(HoLd)

➝ monI(mUtE) ➝ Att...

When press the [MONI(ST/SK)] key, the setting direction reverses.

4 Change the value or setting by

rotating the dial.

5 Press the [FUNC/ENTER] key.

The setting will be completed.

For detailed information of each item, see the followings.

2.3

1.5