User Manual

23
2
Basic Operation
■
In Memory Mode
1 Select a bank by pressing the [BANK(1M/10M)] key.
2 Selectachannelbyrotatingthedial.
It is not possible to select a channel which is not programmed.
Memory Function
This function allows you to program the frequently used frequencies, and call
them up. A programmed frequency is called a channel.
The DJ-X3 has four types of memory functions; Memory channel, Program scan
channel, Priority channel, and Search-pass memory channel.
■
Types of Memory
Memory channel ·····························The channel which is called up in Memory
mode. The DJ-X3 has 700 Memory bank
channels. (70 channels 10 banks) You can
call up a frequently used frequency easily.
Program scan channel····················A channel which is used for Program scan.
You can program 20 pairs of frequency
ranges. (upper and lower limits)
Priority channel ·······························The channel which is used for Priority
monitoring functions. You can program up
to 8 channels.
Search-pass memory channel········If you program a frequency which you do
not want to use, it will be skipped when
executing VFO scan and Program scan.
You can program up to 100 "Skip" channels.
Caution!
It is not possible to program duplicated frequencies in the Search-pass
memory channel. If you try to do so, error beep would go off.
B
BankNo. ChannelNo.
POWER
SCAN
SCRT
V/P/M
MW
BANK
1M/10M
1
2