User Manual

Basic Operation

■

Monitor Function

The Monitor function temporarily unmutes the squelch. This is useful when the

desired signal is weak or intermittent. This function is activated when the status

of the [MONI(ST/SK)] key is set as Monitor function in the Set mode. For more

information, see "Setting Operation of the MONI key." (P.46)

There are two options in the Monitor function: PUSH and HOLD. Both two

options open squelch, and "B" appears on the display when press the

[MONI(ST/SK)] key.

· PUSH: Squelch unmutes while holding the [MONI(ST/SK)] key down. When

release the key, squelch goes back to be normal as you set before.

· HOLD: Squelch unmutes and remains the status once press the

[MONI(ST/SK)] key. Press the key again, then Monitor function is off,

and squelch goes back to be normal as you set before.

Switch the mode between PUSH and HOLD in the Set mode. For more

information, see "Setting Operation of the MONI key." (P.46)

■

Mute Function

This function mutes sound. Even when squelch opens, this function makes

sound off, and while it is activated, beep sound does not go off either. This

function is activated when the status of the [MONI(ST/SK)] key is set as Mute

function in the Set mode. For more information, see "Setting Operation of the

MONI key." (P.46)

There are two options in the Mute function: PUSH and HOLD, as well. Both two

options execute Mute function, and "B" appears on the display when press the

[MONI(ST/SK)] key.

POWER

SCAN

SCRT

V/P/M

[MONI(ST/SK)]key