User Manual

40
6. Useful Functions
6
6-1-3 Memory scan
In Memory mode, either a specied bank or all banks are scanned. The
memory scan offers the following three types of scanning methods.
Single-bank scan This scans only through a specied bank.
Group scan This scans only a group of previously selected
banks.
All-bank scan This scans all banks from 0 through 9 which
are previously programmed.
MEMO
• Bank grouping is possible only when the key pad is installed.
• Banks other than bank 0 through bank 9 cannot be scanned.
• By using the free downloadable software available at the Alinco
website, the all-bank scan can be expanded to scan up to 50 banks (0
to 49).
1
Press the key to switch to Memory mode.
2
Hold down the key and rotate
the dial to select the scanning
method.
Each method is displayed as follows on
the LCD.
• SINGLE ...............
Single-bank scan
• GROUP ...............
Group scan
• ALL ......................
All-bank scan
When you select single-bank scan, the bank which is currently displayed
in Memory mode will be scanned.
3
Release the key to start scanning.
During scanning, the decimal point of the displayed frequency blinks.