User Manual

36
5. Basic Operation
5
5
Press the key to save the frequency.
MEMO
• By default, it is not possible to overwrite the channel to which data has
been programmed.
• To delete or edit memory data, disable the Write-protect (memory
protection) function (
+
P. ••) and then continue the procedure.
Example: When programming a frequency of 145.000 MHz to channel
002 of bank 01
(1) In VFO mode, tune to frequency 145.000.
(2) Press the [FUNC] key.
(3) Press the
key and select bank "01".
(4) Rotate the dial to select memory channel "002".
(5) Press the
key to complete the programming.
●
Example display of a frequency programmed to a memory channel
Memory channelBank number
Programmed frequency
CAUTION
• The bank for programmed scan channels requires programming of two
frequencies to channels 00A and 00b.
Example: When a frequency of 145.020 MHz is programmed to channel
0A, and a frequency of 146.100 MHz is programmed to
channel 0b.
The programmed scan operation scans the range between
145.020 MHz and 146.100 MHz which is programmed to channel
0b.
MEMO
• It is not possible to increase the number of memory channels.
• You can set alphanumeric characters, or symbols, instead of
frequencies to represent the programmed memory channels. For
details, refer to "Memory Naming Function" (
+
P. ••).
• Memory channels can be called up by using either the dial or key pad.