User Manual

5. Basic Operation

●

Switching between bands

• Every time you press the key, the 14 bands shown in the table below

are switched in the listed order.

• You can also select bands by rotating the dial while holding down the

key.

5-5-2 Specifying tuning step frequencies

Tuning steps refer to the intervals between the frequencies which have

been assigned to radio communications and radio/TV broadcasts by the

Ministry of Internal Affairs and Communications of Japan.

The default of the tuning steps can be changed.

The table below lists the tuning steps which can be changed.

The default is set to "Auto". It is not necessary to change the default for

normal operation, however, this feature may be useful when you want to

receive frequencies which are hard to tune with the "Auto" setting.

●

Switching among bands

Every time the key is pressed, the 14 bands shown in the following

table are switched in the listed order.

Default Frequency range

Reception

mode

.100 (100 to 530 kHz) *1

.531 (531 to 1620 kHz) *2

2.000 (1.625 to 49.995 MHz)

51.000 (50.000 to 75.995 MHz)

76.000 (76.000 to 107.995 MHz)

WFM

118.000 (108.000 to 141.995 MHz)

145.000 (142.000 to 169.995 MHz)

175.750 (170.000 to 221.995 MHz)

WFM

270.000 (222.000 to 335.995 MHz)

380.000 (336.000 to 429.995 MHz)

433.000 (430.000 to 469.995 MHz)

475.750 (470.000 to 769.995 MHz)

WFM

806.000 (770.000 to 959.995 MHz)

WFM

1295.000 (960.000 to 1299.995 MHz)