User Manual
8. Set Mode Congurations
63
8
8-2-14 Bell function setting
The Bell function informs you with a bell sound when a signal is received.
1
Select Set menu No. 14, "bELL".
The LCD should look like the gure on the
right.
2
Rotate the dial to switch
between "OFF" and "ON".
When this function is set to ON, the icon appears on the LCD. When
a signal is received, the icon blinks and a bell sounds. Since the
icon continues blinking until the next key operation, this function can also
be used as a "signal reception notication" when you leave the DJ-X30
momentarily.
8-2-15 Monitor Key Operation setting
You can set the operation performed when the [MONI] key is pressed.
1
Select Set menu No. 15, "Moni".
The LCD should look like the gure on the
right.
2
Rotate the dial to select either
"PUSH" or "HOLD".
PUSH The Monitor/Mute function is valid only while the [MONI]
key is pressed.
HOLD The Monitor/Mute function is valid from the instant the
[MONI] key is pressed until the key is pressed again.