User Manual
62
8. Set Mode Congurations
8
8-2-12 Battery-save function setting
This function automatically turns ON/OFF the DJ-X30 frequently in order
to save power consumption during standby and extend battery operation
time.
1
Select Set menu No. 12, "bS".
The LCD should look like the gure on the
right.
2
Rotate the dial to switch
between "ON" and "OFF".
When this function is set to ON, "BS" appears on the LCD.
• The default is set to ON. It is not necessary to turn the function OFF
in normal operation. The conditions where you need to turn it OFF are
when you receive signals of packet communication used for amateur
radio, or of data communication for aviation radio (ACARS) and so on.
• This function becomes invalid temporarily while the DJ-X30 is scanning
or receiving signals.
• The LCD illuminates even when the DJ-X30 is in standby mode.
(The display is the same regardless of whether or not the function is
activated.)
8-2-13 Beep deactivation setting
You can turn off the beep that you hear every time you push a key.
1
Select Set menu No. 13,
"bEEP".
The LCD should look like the gure on the
right.
2
Rotate the dial to switch between "ON" and "OFF".
When OFF is selected, the beep does not sound.
CAUTION
• Setting the beep to OFF also disables the alarm for the timeout of the
APO function and the Bell function sound.