User Manual
60
8. Set Mode Congurations
8
8-2-7 Priority Channel selection
Use this function to select a priority channel. This setting is effective when
priority channels have been programmed in Memory mode (
+
P. ••).
1
Select Set menu No. 7, "Prio".
Channel
Frequency
2
Rotate the dial to select a
priority channel.
The LCD should look like the gure on the
right.
8-2-8 Priority Monitoring interval setting
You can select the interval for which signals from the main channel are
received when the Priority Monitoring function is ON.
1
Select Set menu No. 8, "tiMESP".
2
Rotate the dial to select the
monitoring interval.
The LCD should look like the gure on the
right.
3
By rotating the dial, you can set
the interval within the range of
5 to 60 seconds.
8-2-9 Priority Monitoring duration setting
You can select the time for which reception of signals from the priority
channel is stopped when the Priority Monitoring function is ON.
1
Select Set menu No. 9, "tiMEPr".
2
Rotate the dial to select the
monitoring duration.
The LCD should look like the gure on the
right.
3
This setting also provides busy mode and 1- to
25-second timer mode options.
Select the option according to the table in "Scan Type Switching setting"
described adove.