User Manual

58
8. Set Mode Congurations
8
8-2-3 AM Radio Bar-antenna setting
You can choose either the built-in bar-antenna or an external antenna to
receive AM radio signals. The bar-antenna covers the range of 100 kHz to
3 MHz including the AM radio band.
1
Select Set menu No. 3, "AbAr".
The LCD should look like the gure on the
right.
2
To use an external antenna,
rotate the dial to change the
display from "ON" to "OFF".
The default is set to use the built-in bar-antenna. If you are using an
external antenna, connect it to the SMA antenna connector.
8-2-4 Shortwave Bar-antenna setting
You can choose either the built-in bar-antenna or an external antenna to
receive shortwave signals. The bar-antenna covers the range of 3 MHz to
30 MHz including the shortwave band.
1
Select Set menu No. 4, "SbAr".
The LCD should look like the gure on the
right.
2
To use an external antenna,
rotate the dial to change the
display from "ON" to "OFF".
If the sensitivity is insufcient, refer to "Shortwave Tuning Function" (
+
P. •
•).