User Manual

11. Cable-clone and PC Connection Functions
75
11
11-3 Transferring Data
The procedure below does not necessitate using the PC Connection function.
1
Turn OFF the Master and connect the stereo mini-plug
cable to its earphone jack.
2
While holding down the [MONI] key, press the [PWR] key
to turn ON the Master.
"CLONE" appears on the LCD and the Master enters Clone mode.
The number decreases.
3
While "CLONE" is displayed
on the LCD, press the dial. The
LCD shows something like the
gure on the right and the data
on the Master is transferred to
the Slave.
4
When the data transfer nishes, "FINISH" appears on
the LCD.
If "FAIL" appears on the LCD, repeat the procedure from step 1.
5
Turn OFF the Master.
The Clone mode is not canceled unless you turn OFF the Master.