User Manual

70
9. Channel Display Mode
9
9.
Channel Display Mode
This mode displays only a bank and a channel number instead of a frequency in
the Memory mode. Some other functions are also disabled.
1
Program frequencies into the memory beforehand.
2
Set the Memory mode to ON and turn the power OFF.
Bank
Memory channel
3
Turn the power ON while
holding down the [MONI] and
keys simultaneously.
The LCD should look something like the
gure on the right.
To cancel the Channel Display mode:
Repeat the same operation as above.
MEMO
• In the Channel Display mode, all operations are disabled except for
bank/channel selection, volume adjustment, squelch adjustment,
Monitor/Mute function, Memory Scan, and Key-lock.