User Manual
8. Set Mode Congurations
69
8
8-2-23 Function assignment for remote controller buttons
This menu is available only when the optional remote controller EPS-12 is
used.
You can assign the functions listed in the table below to the remote
controller buttons as desired. The remote controller has four buttons for
function assignment: A through D.
1
Use Set menu Nos. 26 through
29 to assign functions to remote
controller buttons A through D
respectively. The operation is
common to all buttons.
2
Select a button to assign a menu item by selecting from
Set menu Nos. 26 through 29. "rC-A", "rC-b", "rC-C", or
"rC-d" is displayed on the LCD.
The letters "A", "b", "C", and "d" on the right end indicate the operation
button of the remote controller.
3
Rotate the dial until the function you want to assign to
the selected button appears.
The following functions can be selected.
Default
Menu name Description
ATT Attenuator (ATT) function setting
ANTENA Earphone Antenna setting
ABAR AM Radio Bar-antenna setting
SBAR Shortwave Bar-antenna setting
BEEP
Beep deactivation setting
BELL Bell function setting
KEY C UP UP key
KEY D DOWN DOWN key
KEY A V/P/M VFO/Preset/Memory mode switching
AUX IN* External input switching
TONE Tone Squelch function setting
REVTON Reverse Tone Squelch function setting
MONI MONI (Monitor) key
KEY B BAND Band switching
PRIO Priority Monitoring function setting
SPEED Scan Speed switching function setting
AFTONE Audio quality of received signals setting
* This function selects whether to switch to the DJ-X30 automatically
when the squelch opens, or to x the audio input from the portable audio
player.