User Manual

7. Useful Functions/Operations When Key Pad is Installed

7-6 Scan Speed Switching Function

The Scan Speed Switching function changes the scan speed.

Set the scan speed faster to receive strong signals only or to scan quickly, and

set the speed slower to receive weak signals.

Press the [FUNC] key to dispay the icon on the LCD.

Press the key.

A number is displayed. By rotating the

dial, you can adjust the speed in ve

levels.

The scan speed is adjusted as follows:

1: Slowest

5: Fastest

When "v-SPd"is displayed, you can change the scan speed for the

following scan modes:

• VFO scan

• Preset scan (AM/FM radio)

• Programmed scan

When the key is pressed again, "M-SPd" is displayed.

In this state, you can change the scan speed for the following scan

modes.

• Memory scan

• Preset scan (TV)

Press the [FUNC] key to complete the selection.

MEMO

• When the scan speed is too fast, scanning may not stop at some

signals.