User Manual

3. Using Accessories
15
3
3.
Using Accessories
3-1 Attaching/Detaching the External Antenna
1
Hold the antenna at its base
and slowly rotate it clockwise (to
the right).
When you cannot rotate the antenna
further, check that it is securely attached
to the receiver.
2
To remove the antenna, slowly
rotate it counterclockwise (to
the left).
3-2 Attaching the Belt Clip
Belt clip
1
Align the belt clip with the
groove at the rear of the
receiver.
2
Insert the screw into the hole on
the clip and rotate it clockwise
(to the right).
When you cannot rotate the screw further,
check that the clip is securely attached to
the receiver.
3
To remove the clip, rotate the
screw counterclockwise (to the
left).
* The screw may become loose during use. Check the tightness of the
screw from time to time.