User's Manual

42
7. Memory Mode
7
● Entering a memory name
The keys on the key pad are assigned to characters. (P. 43 to P. 47)
When you press the keys on the key pad one at a time, the corresponding
characters are displayed in the order the keys were pressed.
When you press the key on the key pad and then rotate the upper dial,
the characters assigned to the key are displayed in succession. Rotating
the dial further displays kanji characters.
Entry example: To enter "DJ - X11
"
1
Press the key and rotate the upper dial to select “D”.
2
Press the key and rotate the upper dial to select “J”.
3
Press the key and rotate the upper dial to select “-”.
4
Press the key and rotate the upper dial to select “X”.
5
Press the
WILD
key once and rotate the lower dial to move
the character entry cursor.

DJ-X11
15-002
Registered channel name
Memory channel
Bank No.
FM
BS
6
Press the
WILD
key once and ro-
tate the lower dial to move the
character entry cursor.
7
Press the key and rotate
the dial to select “
”.
8
Move the cursor to the right by
rotating the lower right dial.
9
Press the [FUNC] key to nish the setting.
MEMO
• Evenafterthememorynameisregistered,youcanusethefrequency
display. Refer to “Memory name display setting” (P. 92).
• Youcancreateyourownpictographsusingtheutilitysoftware.
• Theashingcharacterisnotyetregistered.Besuretomovethecur-
sortotherightsothatitstopashing.
• Itis recommended touseAlinco’sDJ-X11freeutilitysoftware down-
loadable from alinco.com site for easier and faster naming operation.
One of ERW-4C/7/8 optional PC-connection cables is necessary to
operate with the software.