User's Manual

8
8. Functions Assigned to the Key Pad
53
8-4-2 DCS function
This function allows selective reception according to a similar principle to
the Tone Squelch function.
You can select from 104 DCS codes.
1
Press the [FUNC] key to display on the LCD.

DCS
145.000
FM
VFO
BS
DCS
023
2
Press the key several times
to select “DCS”.
3
Rotate the upper dial to select the DCS code from the
104 codes listed below.
023 025 026 031 032 036 043 047
051 053 054 065 071 072 073 074
114 115 116 122 125 131 132 134
143 145 152 155 156 162 165 172
174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265
266 271 274 306 311 315 325 331
332 343 346 351 356 364 365 371
411 412 413 423 431 432 445 446
452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606
612 624 627 631 632 654 662 664
703 712 723 731 732 734 743 754
<List of DCS codes>
Press the [FUNC] key to fi nish the setting.
When the received DCS code matches with the selected code, the "DCS"
mark is displayed in reverse.
4
To cancel the DCS function, press the [FUNC] key to
display
on the LCD. Press the

key several times
to select “OFF” and then press the [FUNC] key
. The DCS
function is deactivated.
CAUTION
• You should adjust the normal squelch level properly in advance even
when the DCS function is used. If the normal squelch remains open,
the Tone Squelch operation will require a longer time.