User's Manual

7. Memory Mode

• Bank

The relationship between the bank and the memory is as follows:

Number Banks for normal memory channels

(This setting may change before shipment due to the change

in memory data.)

PRG Bank for programmed scan channels

DUAL Bank for dual band channels. A pair of frequencies for

the main and sub bands are programmed in one memory

channel.

PRIO Bank for priority channels

PASS Bank for skip-search channels

BUG Bank for Bug Detector channels (Cannot be edited.)

Select an appropriate bank according to the usage.

• Memory channel

The number of programmable memory channels differs depending on the

bank type as follow

Number 000 to …

PRG 0A to 49B

DUAL 000 to 099

PRIO 000 to 099

PASS 000 to 099

Select an appropriate memory channel according to the usage.

Press the key to complete the programming.

After the programming is complete, the receiver returns to the previous

operation mode.

MEMO

• By default, it is not possible to overwrite a memory channel to which

data has been programmed.

• To delete or edit memory channel data, ﬁ rst disable or temporarily can-

cel the “Write-protect (memory protection) function” (P. 91) and then

continue the procedure.

• By using the free software which can be downloaded from the Alinco

website (http://www.alinco.com/) and the optionally available PC con-

nection cable (ERW-7/ERW-8), you can divide these memory banks as

desired, into up to 50 banks x 1200 memory channels. This operation

cannot be performed with the key pad of the receiver only.