User's Manual

9
9. Useful Functions
67
9-8 DCS Scan
The DCS scan automatically detects DCS codes in the received radio signals.
1
In VFO mode, tune to the frequency to search for a DCS
code.

145.000
FM
BS
VFO
DCS scan
2
Hold down the key and
rotate the upper dial to select
“DCS scan”.
3
Release the key to start scanning.
Scanning starts. DCS codes being searched for are displayed on the LCD
one at a time.
When a matching DCS code is found, a beep sounds, " " and
the DCS code are displayed on the LCD, and scanning stops. Scanning
continues when no DCS code is found in the received radio signals.
4
Press the [FUNC] or key to stop scanning.