User's Manual

10
10. Set Mode Confi gurations
79
2
Rotate the lower dial to select the illumination time.
Rotating the dial switches to select the options as follows:
Always lit Disable all 5sec Turn out 10sec 15sec 20sec 25sec 30sec
Always lit The illumination is on all the time.
Disable all The illumination and RX lamp go off.
Turn out The illumination goes off.
5sec to 30sec
The illumination stays on for the specifi ed time
after operation.
10-2-3 Contrast setting
Use this setting to adjust the depth of the contrast displayed on the LCD.
The default is set to 6.

145.000
FM
VFO
BS
LCD contrast
6
1
Rotate the upper dial to select
“LCD contrast”.
The LCD displays the information as
shown on the right.
2
Rotate the lower dial to select the contrast of the LCD
from “1” through “10”.
10-2-4 Font size setting
When the dual-display is selected, use this setting to switch the font size
for the band which is not being operated.

145.000
FM
VFO
BS
Font size
Small
1
Rotate the upper dial to select
“Font size”.
The LCD displays the information as
shown on the right.
2
Rotate the lower dial to select “Small” or “Large”.
10-2-5 Font style setting
Use this setting to switch the font styles used for numbers.

145.000
FM
VFO
BS
Font Bold
Bold all
1
Rotate the upper dial to select
“Font Bold”.