User Manual

5 Maintenance

NOTENOTE:

■ Digital mode

•Do not use transceivers of the same services within the range of about

10m (30ft). They may interfere each other even the channels may be

different.

•A fading may occur to disturb communications while talking to fast-moving

stations such as vehicles and ships, especially in case an external antenna

of mobile station is shaking. This is due to a nature of propagation of the

radio wave, and is not a defect of the product.

•Never carry magnetic cards of any kind close to transcievers. Its

transmitting RF and/or a strong magnet used in an internal speaker may

erase the magnetic data of cards. We decline any responsibility of the

consequences.

•Electronics devices having inverter circuits and LED illuminations may

generate high level of noise and may interfere with the communication.

5.2 Resetting

When you perform the reset, user-accessible and selectable values in the

set mode will return to default.

1. Turn off the unit.

2. Turn on the unit with the FUNC key, PTT key and Emergency key

pressed.

3. RESET appear on the display.

Press Emergency key to reset, or any other key to cancel.

Reset may be prohibited totally or partially by dealer-programming.

Principal settings such as channels, ID and signaling can't be reset

manually by users. Please contact your dealer in case modiﬁcation

of programming is necessary.

Maintenance