User Manual
25
4 Special Functions
Mode Menu Display Init Item Remarks
D
10 Unit ID (Own) 00001 00001 ~ 65519 Own Unit ID setting
11 Unit ID range L 00001 00001 ~ 65519
To configure a range of Unit
IDs lowest number to allow
communicating.
12 Unit ID renge H 65519 00001 ~ 65519
To configure a range of Unit
IDs highest number to allow
communicating.
13
Over-the Air Alias
OFF ON/OFF Over-the-Air Alias configuration.
A
14
MDC1200 ID
(Own)
00001 0001 ~ DEEE
To configure transmitting MDC1200
ID
15 Single Tone Dur. 5.0s 3.0s ~ 10.0s
2-tone durations
16 1st Tone Dur. 1.0s 0.5s ~ 1.4s
17 2nd Tone Dur. 3.0s 1.0s ~ 4.0s
18 1st Tone Delay 200ms 0ms ~ 1000ms
19 Gap Time 0ms 0ms ~ 500ms
20 Radio Check OFF ON/OFF
To configure Radio Check function of
MDC1200.
21 Stun Validation OFF ON/OFF
To configure Stun function of
MDC1200.
D
22 Remote Stun/Kill OFF ON/OFF
Remote Stun/Kill validation in Digital
mode.
23 Base ID Type Unit ID
Unit ID/ Group ID/
ALL
To configure a type of Base ID
24 Base ID 00001 00001 ~ 65519
To select Base ID
(invalidated when ALL)
25 Emg ID Type Unit ID
Unit ID/ Group ID/
ALL
To configure Emg ID Type
26 Emg ID 00001 00001 ~ 65519
To select Emg ID
( invalidated when ALL)
D=digital, A=analog, D/A=common
Special Functions