User Manual

ManualsBrandsAlinco Incorporated, Electronics Division ManualsElectronicsPush to Talk Radio

4 Special Functions

Mode

Menu Default

Available

parameters/values

Remarks

21 Optional Sig. A None

None/DEMF/

2-tone 1/2-tone 2/

2-tone 3/2-tone 4

Setting optional signaling

PTT ID

(MDC1200)

None

None/BOT/EOT/

Both

PTT ID setting

23 Send Message - -

A message to send when DCALL

being received.

Received

Message

- -

Last message being received as

DCALL.

D=digital, A=analog, D/A=common

■ Advanced Set Mode

1: Pressing and holding Emergency key while turing on to enter an

Advanced set mode.Use triangle keys to select menu.

2: Press Emergency key. The parameter blinks. Use triangle keys to select

the value.Press Emergency key again to set.

3: Repeat above to continue, or press PTT to exit.

Mode Menu Display Init Item Remarks

D/A

1 Hold Red Button None None/Emergency Emergency alarm activation

2 call back OFF ON/OFF

To monitor own transmitting

voice from an earphone (speaker

microphone not usable)

3 VOX OFF OFF/1 ～ 7 VOX off/sensitivity

4 TX over notice ON ON/OFF TOT warning in advance

5 Batt Saver OFF ON/OFF

Battery save

(NOT recommended in digital mode)

6 APO OFF

OFF/

30min ～ 6hours

Auto-Power-Off

7 Time-out Timer 60s 15s ～ 600s Time-out Timer

8 contrast 8 1 ～ 10 LCD contrast

9 LAMP 5 sec. 5 sec./ON/OFF LCD illumination operation

D=digital, A=analog, D/A=common

Special Functions