User Manual
23
4 Special Functions
■ Basic Set Mode
1: Press FUNC key. While F icon is displayed, press MODE key. Use
triangle keys to select menu.
2: Press Emergency key. The parameter blinks. Use triangle keys to select
the value. Press Emergency key again to set.
3: Repeat above to continue, or press PTT to exit.
Mode
Menu
#
Menu Default
Available
parameters/values
Remarks
D/A
1 Talk Around OFF ON/OFF Talk around on/off
2 TX power Low High/Low/OFF Tx power setting
3 SQL 3 0 ~ 9 Squelch level setting
4 End beep OFF ON/OFF Roger-beep on/off
5 MIC gain Low High/Middle/Low Microphone sensitivity setting
6 BELL OFF ON/OFF
Pager function by beep and icon on/off
7 Beep Sound Lv. 2 OFF/1 ~ 4 Beep sound audio level
8 PTT beep OFF ON/OFF Start talking after beep on/off
9 motion sensor OFF OFF/1.man down Man-down on/off
D
10 Delivery
Unconfirmed
Type
Unconfirmed Type/
Confirmed Type
Requests a response from the
destination (confirm) or not
(Unconfirm) upon delivery.
11 NXDN Status val 01(001) 01(001) ~ CF(207)
To select sending NXDN status
message.
12
Stun Response
Status
None
None/
01(001) ~ CF(207)
To Configure the Stun status
message.
D/A 13 Scramble code
00000
(None)
00000(None)/
00001 ~ 32767
scrambling codes
D
14 RAN Dec 00 00 ~ 63 RAN decoding
15 RAN Enc 00 00 ~ 63 RAN encoding
A
16 Compander Rx OFF ON/OFF Compander / receiving voice
17 Compander Tx OFF ON/OFF Compander / transmitting voice
18 Subtone Dec. None
None/CTCSS(50)/
DCS(204)
CTCSS/DCS decoding
19 Subtone Enc. None
None/CTCSS(50)/
DCS(204)
CTCSS/DCS encoding
D 20 Optional Sig. D None NXDN ID/None Setting Digital optional signaling
D=digital, A=analog, D/A=common
Special Functions