User Manual

Names and Operations of Parts
■Display
① ② ④ ⑤ ⑥ ⑦
⑧
⑨
⑩
⑪ ⑫ ⑬
⑭
③
BS
F
♪
SCR
H
CH01
*
ana
VOX
18
Description
①
Appears when the FUNC key is pressed.
Displays when the keypad is locked.
②
Indicates the receiving signal (S-meter) and
transmis-sion output levels (Power-meter).
Hi Low
③
Appears when an incoming call matches your
optional signaling. Appears when setting the
BELL function.
④
Appears when setting the scrambler.
⑤
Displays the transmission output setting.
⑥
Appears when setting the Auto-Power-Off
function.
⑦
Appears when setting the Battery Save function.
⑧
Indicates the battery-level.
⑨
Appears when setting the Voice Compander
function. (analog mode)
⑩
Appears when setting the Man-down function.
⑪
Appears when setting the callback function.
⑫
Appears when setting the VOX.
⑬
Displayed when in the analog mode.
⑭
Displays the operating frequencies, Channel-
name and parameters in the setting mode.
Basic Operation
3
3.1 Turning On the Power
Turn Power / Volume dial clockwise to
power on.
Turn it counter-clockwise to power off.
3.2 Adjusting the Audio Output (Volume)
Press and hold MONI key to monitor
white noise to refer to the current audio
level.
Turn Power / Volume dial clockwise to
increase the audio level,
counter-clockwise to decrease.
Never use earphone while adjusting
audio level for your safety.
3.3 Selecting the Operating Channel
Press ▲ key or ▼ key to select the
channel to communicate. Press and
hold the keys to continuously change
the channel numbers.
CH01
19
NOTENOTE:
Password
When [----] appears on the display,
a password has been set by your
dealer. Enter a 4-digit code the
dealer assigned for you.
Assigned number to keys are as
follows:
FUNC =1, ▲ =2, MODE =3,▼ =4
•For example, to enter 1334, press
keys in order of
FUNC,MODE,MODE,▼